設備更多新疆烏恰縣高海拔鐵礦開發項目，鐵礦石破碎加工
一、項目背景及地理環境
新疆烏恰縣某鐵礦位于中國與吉爾吉斯斯坦邊境30公里范圍內。礦區平均海拔3200米，年均氣溫僅3.5℃，冬季最低溫可達-30℃，年降水量不足200mm，屬于典型的高寒干旱礦區環境。
該礦區已探明赤鐵礦儲量超過5000萬噸，平均鐵品位達58.3%，伴生有釩、鈦等有價元素。礦體呈層狀分布，厚度8-15米，傾角25-35°，礦石普氏硬度f=12-14，具有顯著的耐磨蝕特性。
二、生產需求與技術挑戰
設計產能要求：
年處理原礦80萬噸
產品粒度要求0-25mm占比≥90%
系統可用率≥92%
特殊環境制約：
（1）高海拔影響：
空氣含氧量僅為平原地區的65%
柴油機功率損失達30%
液壓系統效率降低20%
（2）地理條件限制：
礦區道路最大坡度18%
作業區溫差達40℃（-20℃至+20℃）
季節性強風（最大風速28m/s）
三、設備選型解決方案
經過多方比選，最終選用世邦集團NK系列移動破碎篩分系統，具體配置如下：
核心設備參數：
顎式移動破碎站
處理能力：150t/h
進料粒度：≤650mm
防風設計：8級抗風結構
圓錐移動破碎站
液壓系統：低溫型(-40℃)液壓油
四、項目實施關鍵節點
技術創新點：
（1）高海拔適應性改造：
發動機增壓系統升級
液壓油冷卻系統優化
電氣元件防凝露處理
（2）快速安裝技術：
采用液壓升降支腿系統
模塊化管線連接設計
預編程控制系統
五、運營數據對比
經濟效益：
達產時間比傳統方案縮短45天
人力成本節約40%（僅需5人操作）
運輸成本降低30%（就地破碎）
六、后續合作升級
基于首期項目的成功實施，雙方于同年11月展開二期合作：
技改內容：
原固定生產線自動化升級
增加X射線智能分選系統
建設更好控制室
七、行業示范意義
該項目創建了高海拔礦區裝備應用的三個示范：
首次在3000米以上礦區實現移動破碎站連續作業
建立高原環境下設備選型數據庫
開發出適用于邊境礦區的遠程運維方案
鐵礦石破碎加工鐵礦石破碎研磨提純等加工工藝流程介紹
鐵礦石破碎研磨提純等加工工藝流程介紹鐵礦石破碎加工鐵礦石銅礦石花崗巖玄武巖河卵石等礦巖石破碎加工.鐵礦石磨礦環節通常選用球磨機,在進行磨粉精加工之前,也可再設計一道細碎環節,選用...
鐵礦石破碎加工鐵礦石破碎解決方案
對鐵礦石原石硬度較高破碎難度大以及鐵礦生產線對設備產能要求更大設備穩定性更好的問題,礦石集團開發的多缸液壓圓錐破,多缸液壓圓錐破...
鐵礦石破碎加工鐵礦石破碎生產線流程
照港項目破碎虎口礦石中廢鐵怎么處理鐵礦
承德鐵礦石破碎加工廠鐵礦石破碎加工
鐵礦石破碎加工煤塵治理系統運行情況良好,從干理,在煤塵治理系統運行過程中,應加強管防止大雜物進入氣流輸送系統中。期年月選煤技術文章編號一山西陽光焦化集團有限選煤一廠煤泥水系統的改造王志輝山西陽光焦化集團有限,山西河津摘要針對山西陽光焦化集團有限選煤一廠煤泥水工。
先打開吸塵管閥門，接通供電電源打開設備的控制電源砂帶旋轉，操作時，被砂磨部件放于工作臺相對固定的位置上，然后緩慢拉動工作臺前后移動，靠移動式輔助砂架作用于砂帶上的自重黎明自動砂屑，如果采取手工操作時，作用于砂帶和被砂板上的黎明應均勻，不得呼大呼小，不得用力過猛，防止損壞砂帶和影響產品的加工質量。
。安裝時應注意主機體與水平的垂直螺旋分機。檢查完畢，進行空負荷試車，試車正常即可進行生產水泥生產工藝流程。精加工高材質。
其實客戶的心理，我們完全的可以理解，客戶手頭的錢并不是大風刮來的，而是通過自己的辛勤的勞動換來的，所以在做投資購買的時候，非常的小心，這種心理是很正常和普遍。上部礦倉一般為圓形礦倉,直徑不小于,礦倉高度一般為有效容積應大于兩列礦車的運礦量。四建設規模電廠為新建工程，規劃容量超臨界機組，本期工程裝機容量為。b地方群眾干擾路基水排入灌溉涵洞內。
③沿線設置的涵洞有排涵、灌涵和灌排兩用涵。。水選礦石設備業礦石干選設備具有五大更點①選礦不用水由于本公司干式磁選機，因此無需用水，與水選相比，一無污泥污水產生，二可節約水資源。
Henan LIMING Heavy Industry Science and Technology Co. LTD which mainly manufacture large and medium-sized crushing and grinding equipments was founded in 1987. It is a modern joint-stock corporation with research, manufacturing and sales together. The Headquarter is located in HI-TECH Industry Development Zone of Zhengzhou and covers 80000 m ². Another workshop in Shangjie Industry Park covers 67000 m ². Over the more than 30 years, our company adheres to modern scientific management system, precision manufacturing, pioneering and innovation. Now LIMING has become the leader in domestic and oversea machinery manufacturing industry.
LIMING brings a large number of high-qualification talents together. Bai Yinghui, general research and development engineer, is a well-known expert in crushing and grinding area who won the youth medal of technology of the state council and receives special government allowance. LIMING owns an experienced service team, offering the customer free design and professional skill training and live guide for installation and debugging. The company's service networks have spread all over the country. Established client files, and mix the traditional door-to-door service with online service together, complementary the advantages. LIMING has won high recognition from clients.
The company mainly manufactures mobile crushers, stationary crushers, sand-making machines, grinding mills and complete plants that are widely used in mining, construction, highway, bridge, coal, chemical, metallurgy, refractory matter, etc. Product quality is life, and scientific innovation is motive power. LIMING got ISO international quality system certification, European Union CE certification and Russian GOST certification. The company has strong research and development strength and innovation.
LIMING machinery research institute was founded in 2005 which is the most powerful comprehensive technological research institute in the domestic mining machinery industry and provides top scientific research platform for professional personnel. Up to now, LIMING has won 10 national patents, 24 national utility model patents and 3 provincial science and technology achievement awards. The company products remain the international leading level by strengthening international exchanges and cooperation all the time, and has won a wide range of international market, such as Russian, Azerbaijan, Kazakhstan, Turkey, Kuwait, South Africa, Egypt, Vietnam, Malaysia, India, Australia, Korea, Canada and European Union,etc. Through more than 30 years' hard work, LIMING's staff built supremacy of credibility, excellent quality, service "LIMING" brand, and has made outstanding contributions to the development of mechanical manufacturing industry for China and the whole world.
現場視頻如下：
Copyright ? 2011 黎明重工 | 免費在線客服>>機制砂設備價格 機制砂設備導航: |VSI6X制砂機 |5x制砂機 |VSI制砂機 |PCL制砂機 |VUS骨料優化系統 |VU骨料優化系統 |顎式破碎機